Here’s how I connect two framed walls at a corner.
In the last video, I built a wall in place - I’m gonna build this small sample wall on the ground.
I make sure to crown all the studs up.
Sometimes you get a stud that’s twisted, so I make a tool to twist them in place.
To square the wall, I pull a tape measure from corner to corner on both sides.
I adjust the wall until the numbers match- then I know I’m square.
I like to use ring shank galvanized nails on sheathing.
We let the OSB extend past the wall 5 ½’ -this will help to tie together the corner.
After I drill a hole for the anchor bolt, I staple the sill seal directly to the bottom plate.
Next, I install a California corner into the wall that’s already standing.
This corner gives me a place to nail the two walls together, and there’s room behind to fit insulation.
Now I stand up the new wall, line up the anchor bolt, and drop it in place.
First, I nail off the California corner before moving to the outside to nail off the OSB; then I use my impact to tighten the nut on the anchor bolt.
Here you can see where the two walls connect: I held the double plate back on the first wall- this way the double plate on the new wall will overlap and tie the two together.
Overlapping the double plate at corners and intersecting walls adds a ton of strength.
More to come on this series- be sure to like and follow. @hausplans
#builld #framing #carpentry #wall #howto #construction #diy #contractor
Auf dieser Seite können Sie das Online-Video How To Connect Two Framed Walls At A Corner mit der Dauer stunde minuten sekunde in guter Qualität ansehen, das der Benutzer HAUS PLANS ®️ 13 März 2024 hochgeladen hat, den Link mit Freunden und Bekannten teilen, dieses Video wurde auf Youtube bereits 3,828,108 Mal angesehen und es wurde von 139 tausend den Zuschauern gefallen. Viel Spaß beim Betrachtenden Zuschauern gefallen!