Getting started with Logisim - A Basic Counter | Advanced Computer Organization.
NOTE:
Forgot to connect the power. Power should be connected to the very bottom on the left and is with ground in the menu.
Description: Using Logisim (link below), create a simple 8-bit counter (with ground and power connected) and the output connected to two hex displays, splitting the upper and lower nibble (4-bits). Hint: a bus splitter is required.
Logisim download | SourceForge.net (Links to an external site.)
https://sourceforge.net/projects/circ...
Steps: A) Drag a "counter", a "splitter", a "clock generator" and 2 Hex displays to the simulation area. B) Configure the counter to have 8 bits. C) Connect the output of the counter to the two hex displays, using the splitter. D) Connect the clock generator to the clock port of the counter.
Criterion: For a submission to be valid, when I open your submission (a *.circ file) and hit the clock generator, the two hex displays must start counting up: 00, 01, 02, 03...
More CPE 142. Advanced Computer Organization.:
• Advanced Computer Organization.
On this page of the site you can watch the video online Getting started with Logisim - A Basic Counter | Advanced Computer Organization. with a duration of hours minute second in good quality, which was uploaded by the user Computer Engineering life 04 September 2022, share the link with friends and acquaintances, this video has already been watched 18,472 times on youtube and it was liked by 112 viewers. Enjoy your viewing!
