In this video, we will do some tests with the Beryl GL-MT1300 router to see the performance when it comes to NAT, Hardware Flow Offloading and Wireless. At the same time, OpenVPN & Wireguard VPN client will be configured on the router and let's check the CPU usage and speed when running the tests.
You can find the Beryl GL-MT1300 here: https://bit.ly/2W5wRtS
The tests were done with OpenWRT firmware from GL.iNET with default setting (except for the hardware flow offloading feature).
As expected, the OpenVPN throughput is around 16 Mbps and Wireguard VPN throughput is around 100 Mbps. The normal WAN to LAN throughput with the WAN port configured in DHCP mode is around 450 Mbps. With Hardware Flow Offloading enabled, the speed reach 875 Mbps with the CPU at 94% idle.
Video timeframe:
00:00 - Introduction of the Beryl GL-MT1300 Performance Test
00:35 - Preparation for the test (SSH, top and bmon)
02:15 - WAN to LAN Speedtest (NAT)
03:16 - Wireguard VPN Client Speedtest
06:54 - OpenVPN Client Speedtest
09:17 - Enable Hardware Flow Offloading on the Beryl GL-MT1300 (Mediatek MT7621A)
11:13 - Beryl GL-MT1300 Hardware Flow Offloading NAT test
12:45 - 5GHz WiFi Speedtest
Thanks for watching and see you in the next video!
On this page of the site you can watch the video online OpenWRT - Beryl GL-MT1300 Performance Test (NAT, Hardware Offloading, Wireguard & OpenVPN) with a duration of hours minute second in good quality, which was uploaded by the user Van Tech Corner 28 August 2021, share the link with friends and acquaintances, this video has already been watched 7,061 times on youtube and it was liked by 111 viewers. Enjoy your viewing!