Threadmilling on a manual lathe
I had work recently that required some ID threads with basicaly no leadout. I did them with a regular tap, followed by a bottoming tap that had all its lead ground away. As the material was 316 stainless, it was a rather painfull experience ;-)
Threadmilling could be a very good solution, as it is almost completely independent from the rotational speed of the workpiece.
Here is what I tried, with a heavy duty routermotor mounted to my lathe.
Also: Shopground threadmills, deburring and coldblue-application.
Visit my website for FAQ, a list of my machines, my products and some project documentations:
http://gtwr.de/
Consider supporting me on Patreon:
/ stefangtwr
I post very regular on Instagram:
/ stefan_gtwr
#practitioner_of_the_mechanical_arts
En esta página del sitio puede ver el video en línea Threadmilling on a manual lathe de Duración hora minuto segunda en buena calidad , que subió el usuario Stefan Gotteswinter 26 julio 2020, comparta el enlace con amigos y conocidos, en youtube este video ya ha sido visto 140,428 veces y le gustó 3.9 mil a los espectadores. Disfruta viendo!
