Threadmilling on a manual lathe

Опубликовано: 26 Июль 2020
на канале: Stefan Gotteswinter

140,428

3.9k

I had work recently that required some ID threads with basicaly no leadout. I did them with a regular tap, followed by a bottoming tap that had all its lead ground away. As the material was 316 stainless, it was a rather painfull experience ;-)

Threadmilling could be a very good solution, as it is almost completely independent from the rotational speed of the workpiece.

Here is what I tried, with a heavy duty routermotor mounted to my lathe.

Also: Shopground threadmills, deburring and coldblue-application.

Visit my website for FAQ, a list of my machines, my products and some project documentations:
http://gtwr.de/

Consider supporting me on Patreon:
/ stefangtwr

I post very regular on Instagram:
/ stefan_gtwr

#practitioner_of_the_mechanical_arts

На этой странице сайта вы можете посмотреть видео онлайн Threadmilling on a manual lathe длительностью часов минут секунд в хорошем качестве, которое загрузил пользователь Stefan Gotteswinter 26 Июль 2020, поделитесь ссылкой с друзьями и знакомыми, на youtube это видео уже посмотрели 140,428 раз и оно понравилось 3.9 тысяч зрителям. Приятного просмотра!

37,384

1.6 тыс

00:00:00