Boundary Surface Feature | Solidworks Boundary Surface | Boundary Surface with Guide Curves

Publié le: 03 août 2024
sur la chaîne: CADable
367
9

Boundary Surface Feature | Solidworks Boundary Surface | Boundary Surface with Guide Curves | CADable | CADable tutorials

Boundary Surface Feature inHi friends, welcome back to CADable! This is Engr. Ibrahim Omer. In today's tutorial, we will learn how to use the SolidWorks Boundary Surface feature with guide curves. We'll walk through an example, creating different sections and curves, and then using the boundary surface command to generate a smooth surface.

Here's what you'll learn:

Creating sections and guide curves.
Using the Boundary Surface command.
Converting the surface body to a solid body using the Thicken command.
Applying appearance to the solid body.
Using the Fillet command to remove sharp edges.
This tutorial is perfect for beginners. I hope you find it helpful!

Chapters of the tutorial:

Introduction 0:00
Creating sections using three point arc 0:36
Creating guide curves using spline 2:06
Boundary surface feature 3:08
Surface to solid using thicken command 3:42
Applying appearance 4:06
Applying fillet on sharp corners 4:21
Conclusion 4:39

Take your time, hit pause if needed, and feel free to drop any questions in the comments. Remember, practice makes perfect!

Don't forget to subscribe to our channel for more tutorials like this:
   / cadable​  

#solidworksboundarysurface #boundarysurfacefeature #surfaceswithguidecurves #CADable #CADabletutorials


Sur cette page du site, vous pouvez voir la vidéo en ligne Boundary Surface Feature | Solidworks Boundary Surface | Boundary Surface with Guide Curves durée heure minute seconde en bonne qualité , qui a été Téléchargé par l'utilisateur CADable 03 août 2024, Partagez le lien avec vos amis et connaissances, sur youtube cette vidéo a déjà été regardée 367 fois et il a aimé 9 téléspectateurs. Bon visionnage!