OpenWRT - Intel N5105 Router PC WiFi Module Install & Configuration (QCA9880)
In this video, I am going to install the Wallys DR900VX Wireless Module (Qualcomm-Atheros QCA9880 chipset) on the Intel N5105 Router PC and configure it. At the end, there will be a quick iperf3 throughput test.
Basically, the installation is very simple and you just need to install the below packages if you are using modules that is based on the QCA988x:
ath10k-firmware-qca988x-ct (Alternative ath10k firmware for QCA988X from Candela Technologies.)
kmod-ath10k-ct (ath10k-ct driver optimized for CT firmware)
hostapd ( to enable 802.1x/WPA/EAP/RADIUS Authenticator)
Video timeframe:
00:00 - Intro & Hardware Overview
01:11 - Check if the Wireless Network Adapter is Detected (LuCI & lspci)
02:35 - Overview of firmware & driver for the QCA988x module
03:39 - Install QCA998x firmware & driver on LuCI
04:51 - Setup the WiFI SSID & Connection Check
07:28 - WiFi Throughput Test with iperf3
That's all for this video. Thanks for watching and see you in the next one!
On this page of the site you can watch the video online OpenWRT - Intel N5105 Router PC WiFi Module Install & Configuration (QCA9880) with a duration of hours minute second in good quality, which was uploaded by the user Van Tech Corner 23 July 2023, share the link with friends and acquaintances, this video has already been watched 7,002 times on youtube and it was liked by 100 viewers. Enjoy your viewing!
